Page Comparison

eThis This guide is primarily for the Imaging Specialist who is deploying new systems out-of-box within TTS.

...

1. Unbox the computer.
2. Connect computer to Ethernet.
3. While holding the "N" key, turn on the power to the computer. Computer will boot to the default Netboot image provided by the TTS Casper Admin.
4. Once boot up is complete, Casper Imaging will launch automatically. Log in with your Casper credentials to continue.
   
5. Click the "Site" button, as indicated by Circle #1. Select "DU - Trinity Technology Services" from the dropdown list, if it is not already selected.
6. Look now at the inner gray frame, as indicated by Circle #2. Ensure the following information is provided:
   1. Target Drive
   2. Whether or not you will erase the factory-provided OS
   3. The TTS computer name provided to you
   4. The appropriate imaging configuration
      (If you are unsure, choose one of the "DU - TTS - CFG - General Use..." configurations and/or ask your supervisor)
   5. Check "Boot to target drive after imaging"
   6. Leave Distribution Point alone
7. As indicated by Circle #3, click the "Image" button to begin the process of installing software.

...