See the attachments tab above for the reports from the old Duke, Vanderbilt, and UC San Diego design teams.
Spring 2008 Duke Team
Report overview
the project was carried out by Odelia Ghodsizadeh, Scott Kasper, Sean McGuire, and Brian Robinson for the BME262 design course taught by Dr. Robert Malkin
- the team is designing for a 1-2L cavity at 2-8degC for less than $300
- shaker/solar-powered fridge to deliver 6W with an energy storage mechanism
- testing was performed on a small volume "soda-fridge" ($40) that employs a fan to suck air over a heatsink and out the device's back
- initial testing indicates that it takes about ten hours at 16W or five hours at 23W to reach 8degC
- purchased 28W solar panel ($150) able to generate 23W on sunny days; clouds reduced output to 1W
- ran a 19hr test after powering the fridge for 5hrs
- utilized a phase change material from "TCP Reliable, Inc." to (presumably) solidify during the fridge's cooling, and absorb latent heat energy as the box warmed. Melting point was 5degC
- fridge remained below 8degC for 12hrs; ambient temp was 21degC
- team stated desire to add additional insulation to the fridge
- a test involving simulated ambient temperatures of 44degC (via a hair dryer) saw the fridge hold at about 15degC with constant grid power
- team hypothesized that the box could fall below 2degC (their lower temperature bound) on cold days
- sealed the exhaust ducts to bring the temperature back up; the ducts normally carry away latent heat from the box
- report includes extensive list of fridge-related patents
Comments
I was surprised to learn the device only worked with a fan and heatsink. We could easily build one of these devices for a few dollars. The solar decision does not seem like a good idea; the device becomes far more fragile and too susceptible to the weather. They discussed including shaker-flux generators but did not pursue the idea.
|
|
